Barnard låsesystem S

Barnard låsesystem S


A cylindrical three lug action, basically a Remington exterior configuration (almost a drop-in to a stock inletted for a Remington S/A).
The receiver is of 4340 chrome/moly/nickel steel through hardened to 38Rc and finish machined after surface hardening to ensure concentricity. Recoiling options are either a Remington style recoil lug or a 1/4" x 28mm cap screw from the action into a steel lined hole in a bedding block. The bolt is equipped with a Sako type extractor and boltface plunger type ejector as standard. This action is supplied as standard with no trigger, but with a hanger to enable fitting the trigger of choice (such as any "Remington style" clone). Single-shot configuration only.

Receiver Length: 207mm (8.15")
Receiver Diameter: 34.5mm (1.359")
Bolt Diameter: 20mm
Bolt Stop: "Push" side lever. (Stop length adjustable for greater throw length)
Barrel Thread: 1 1/16" 16TPI
Bolt Face: .223 to standard .308
Striker Tip Diameter: .062"
Action Screw Holes: 2 X 1/4" UNF at Remington spacing
Action Weight: 40 oz (average)
Lock Time: 1.9 micro seconds
Loading Port Length: 73mm (2.87")
Sight Mounting Holes: Drilled and tapped to suit most sights. (eg Central, Redfield, RPA, Warner)
Drilled and tapped (M4) for full length rails or weaver type bases.
Finish: Blue/black as standard.
Pris ved 1Stk 9.500,00 DKK

Varenummer 1117653
Lager
 
Lev. 90 dage


A cylindrical three lug action, basically a Remington exterior configuration (almost a drop-in to a stock inletted for a Remington S/A).
The receiver is of 4340 chrome/moly/nickel steel through hardened to 38Rc and finish machined after surface hardening to ensure concentricity. Recoiling options are either a Remington style recoil lug or a 1/4" x 28mm cap screw from the action into a steel lined hole in a bedding block. The bolt is equipped with a Sako type extractor and boltface plunger type ejector as standard. This action is supplied as standard with no trigger, but with a hanger to enable fitting the trigger of choice (such as any "Remington style" clone). Single-shot configuration only.

Receiver Length: 207mm (8.15")
Receiver Diameter: 34.5mm (1.359")
Bolt Diameter: 20mm
Bolt Stop: "Push" side lever. (Stop length adjustable for greater throw length)
Barrel Thread: 1 1/16" 16TPI
Bolt Face: .223 to standard .308
Striker Tip Diameter: .062"
Action Screw Holes: 2 X 1/4" UNF at Remington spacing
Action Weight: 40 oz (average)
Lock Time: 1.9 micro seconds
Loading Port Length: 73mm (2.87")
Sight Mounting Holes: Drilled and tapped to suit most sights. (eg Central, Redfield, RPA, Warner)
Drilled and tapped (M4) for full length rails or weaver type bases.
Finish: Blue/black as standard.